Attaching the Handle
If the frame is attached to the device:
Slide the handle tabs on the base of the handle into the gap between the frame tabs and the device holes. Snap the handle into place.
Important: Do not place the handle tabs on top of the frame tabs. The frame will crack when you tighten the screws.
Using a Phillips screwdriver, insert the screws that came with the handle through the holes in the frame tabs and tighten.
Note: The holes in the frame tabs are larger than the heads of the screws. When you fully tighten the screws, the heads of the screws will not be in contact with the frame tabs.
If the frame is not attached to the device:
Align the holes in the handle tabs with the holes on the top of the device.
Snap the handle into place.
Insert the screws that came with the handle into the holes in the handle tabs and tighten.
Hold the frame up to the device, align the frame tabs with the holes on the bottom and sides of the device, and snap the frame into place.
Optional: Secure the frame with screws.
Removing the Handle
Using a Phillips screwdriver, remove the screws that hold the handle in place.
Carefully pull the handle away from the device. The tabs on the handle will slide out from between the frame tabs and the device holes.