--- title: "Back Up a Vocabulary File" slug: "back-up-a-vocabulary-1-1" updated: 2026-09-20T20:12:38Z published: 2026-09-20T20:12:38Z canonical: "documentation.prc-saltillo.com/back-up-a-vocabulary-1-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://documentation.prc-saltillo.com/llms.txt > Use this file to discover all available pages before exploring further. # Back Up a Vocabulary File ## Save a Backup File 1. Insert a flash drive into a USB port on your device. 2. Select **Tools** and then **Toolbox**. 3. Select **Transfer Memory Menu**. 4. Select **Save One User Area** and then the area you want to back up. Or select **Save Entire Device Contents**. 5. Make sure the pre-set folder is your USB flash drive. - If it is, select **OK**. - If it is not, select **Choose Different Folder** and nvigate to the USB flash drive. Then select **OK**. 6. Type the file name and date (xx-xx-xx). 7. Select **OK** and wait for the memory transfer to finish. Select **OK** and then **Go to Home**. ## Load a Backup File 1. Insert a flash drive into a USB port on your device. 2. Select **Tools** and then **Toolbox**. 3. Select **Transfer Memory Menu**. 4. Select **Load One User Area** and choose the user area you want or **Load Entire Device Contents**. 5. Select the backup file on the USB drive. 6. Wait for the memory transfer to complete. Select **OK**. 7. If you are asked “Switch to this User Area now?”, answer yes or no and select **OK**. Select **OK**.