--- title: "Wrap Instructions" slug: "change-the-wrap-on-novachat" updated: 2026-08-11T20:53:28Z published: 2026-08-11T20:53:28Z canonical: "documentation.prc-saltillo.com/change-the-wrap-on-novachat" --- > ## Documentation Index > Fetch the complete documentation index at: https://documentation.prc-saltillo.com/llms.txt > Use this file to discover all available pages before exploring further. # Wrap Instructions The colored wrap protects your device. It was made to fit tightly and stay on once attached. Follow these instructions to change the wrap on your device. **Note:** The images in these instructions show the Active wrap. The processes for removing and attaching the Classic wrap are the same. ## Remove a Wrap 1. Pull one of the bottom corners of the wrap off the device. 2. Pull the other bottom corner off the device. 3. Pull the sides of the wrap away from the device. 4. Pull the top of the wrap **straight up and over the power and volume buttons** until the wrap is off the device. ## Attach a Wrap 1. Align with holes in the top of the wrap with the device power and volume buttons. ![A picture containing text, case, accessory Description automatically generated](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/change-the-wrap-on-novachat-image-gqy4iovf.jpg?sv=2026-02-06&spr=https&st=2026-11-19T07%3A17%3A57Z&se=2026-11-19T08%3A17%3A57Z&sr=b&sp=r&sig=cR9gSt5FOgNAAheO4W%2FsP6Q64OGkQ2NPjw9wPRai%2BhQ%3D) 2. Place one corner of the wrap onto the device. 3. Pull the other top corner of the wrap onto the device. ![A picture containing person, accessory, hand, case Description automatically generated](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/change-the-wrap-on-novachat-image-wp46iqfi.jpg?sv=2026-02-06&spr=https&st=2026-11-19T07%3A17%3A57Z&se=2026-11-19T08%3A17%3A57Z&sr=b&sp=r&sig=RTbZ9eZ5rzmd3VnLOKd6P%2BqnxMtljdjW5I7jqgeYhwc%3D) 4. Pull one of the bottom corners of the wrap over the bottom corner of the device. You will need to stretch the wrap to pull it into place. 5. Pull the other bottom corner of the wrap over the bottom corner of the device. You will need to stretch the wrap to pull it into place. ![A picture containing text, monitor, electronics, case Description automatically generated](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/change-the-wrap-on-novachat-image-ejqp0v8x.jpg?sv=2026-02-06&spr=https&st=2026-11-19T07%3A17%3A57Z&se=2026-11-19T08%3A17%3A57Z&sr=b&sp=r&sig=6RWwIx34TnY%2Fz3rTOJrICBCz2qK1YMc6zSshDSqa%2FWg%3D) 6. Push the sides of the wrap tightly into place. The image below shows an example of too much space between the wrap and the device frame. ![](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/image-1750254263230.png?sv=2026-02-06&spr=https&st=2026-11-19T07%3A17%3A57Z&se=2026-11-19T08%3A17%3A57Z&sr=b&sp=r&sig=VATIF5aQmgcKnqr8xmPYesDdNcBAiknX5OG%2FoNkyHhw%3D) 7. Make sure the top, bottom, and sides of the wrap fit tightly against the device as shown in the image below. ![A picture containing text, blue, oven Description automatically generated](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/change-the-wrap-on-novachat-image-ldrfn7rz.png?sv=2026-02-06&spr=https&st=2026-11-19T07%3A17%3A57Z&se=2026-11-19T08%3A17%3A57Z&sr=b&sp=r&sig=rlvQc75R%2BassPi%2F91cthhrpfBoYdEndAi5c5X4NMljM%3D)