--- title: "Choose an Access Method" slug: "choose-an-access-method-1-1-1-1" updated: 2026-09-20T20:12:38Z published: 2026-09-20T20:12:38Z canonical: "documentation.prc-saltillo.com/choose-an-access-method-1-1-1-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://documentation.prc-saltillo.com/llms.txt > Use this file to discover all available pages before exploring further. # Choose an Access Method ## Touch Access Setup When **Touch** is selected, you touch keys on the screen to select them. ### Step 1: Set the Access Method to Touch 1. Select **Tools**, then **Toolbox**. 2. Select **Access Method Menu**. 3. Select **Choose Different Access Method**. 4. Select **Touch.** ### Step 2: Attach Keyguards and TouchGuides If you are using keyguards or TouchGuides with the NuVoice software, attach them to the device. See the instructions that came in the box. ### Step 3: Observe Performance Observe the user’s performance while using the factory defaults and any recommended keyguards or TouchGuides. This information will help you decide if adjustments to the touchscreen are necessary. ### Step 4: Adjust Settings **Acceptance Time** is the amount of time you need to touch the key until it activates. **Release Time** is the amount of time the key will remain depressed. Subsequent selections on the key will be ignored. **Activate Key When – Pushed:** A key will activate when pushed. **Activate Key When – Released:** A key will activate when the finger, stylus, etc. is removed from the key. This allows a user to drag a finger across the screen and release when the desired key is reached. **Auto Repeat** allows the user to select the same key multiple times by maintaining touch on the key for the selected period of time. **Predictive Selection** makes blank keys are inactive. --- ## Switch Scanning Setup ### Step 1: Decide on Number of Switches **1 Switch vs. 2 Switches:** The number of switches, switch placement, and type of switch are areas that should be assessed by professionals who have experience helping individuals with complex physical disabilities. In general, two switches work best for individuals who have two natural movements that can be used to activate two separate switches. The primary advantage is that there is no timing element; the learner is in complete control. By contrast, one switch works best for individuals who do not have a clear second movement, or for whom fatigue is a significant consideration, or for individuals who simply work best reproducing the same movement repeatedly with a timing element. ### Step 2: Connect the Switch to the Device If you are using one or two wired switches, plug the switch into Switch Port A (and B) on the back of your device. ### Step 3: Set Access Method to 1 or 2 Switches 1. Select **Tools**, then **Toolbox**. 2. Select **Access Method Menu**. 3. Select **Choose Different Access Method**. 4. Select **1 Switch** or **2 Switch**. ### Step 4: Select Scan Type and Pattern Many different types of scanning appear on the screen. You have two decisions to make before you make a selection—the type of scanning and the scan pattern. #### Types of scanning: **Auto** Once the scan is started with the click of a switch, the scan box moves across the keys automatically at a desired speed. The next click of the switch will stop the scan and select the scan box that is highlighted. **Hold** Press and hold down the switch to move the scan box across the keys automatically at a desired speed. **Step** Click a switch each time you want the scan box to advance. This type of scanning requires more switch clicks (more motor movements). However, the primary advantage is that there is no timing element; the learner is in complete control. If using 1 switch, the act of not activating the switch for a set interval will result in selection of the highlighted scan box. If using 2 switches, switch A advances the scan box and switch B makes the selection (switch A = “the mover”, switch B = “the chooser”). #### Types of scan patterns: **Row/column** First scans the grid in rows. Once a row is selected, it then scans each individual key in that row. First the grid is scanned from top to bottom via rows. Then the row is scanned from left to right via individual keys. **Column/row** First scans the grid in columns. Once a column is selected, it then scans each individual key in that column. First the grid is scanned from left to right via columns. Then the column is scanned from top to bottom via individual keys. **Quarter row/column** First scans the grid in four blocks and then the message window moving clockwise. Once a block is selected, the block is then scanned via row/column as described above. **Quarter column/row** First scans the grid in four blocks and then the message window moving clockwise. Once a block is selected, the block is then scanned via column/row as described above. **Linear** Each key is scanned one by one moving from left to right and top to bottom. **Extra Hit** Once the switch is clicked, select it again to get the auto scan to start again. ### Step 5: Adjust Settings You can adjust a variety of settings in the Access Method Menu. --- ## Connect an AeroSwitch to NuVoice You can pair an AeroSwitch or multiple switches to NuVoice. You can also use an AeroSwitch with other access methods. #### Connecting an AeroSwitch 1. In NuVoice, select **Access Method Menu**. 2. If switch scanning is not already selected, select **Choose Different Access Method**, select **1 Switch** or **2 Switch**, and select a specific switch scanning method. **Note:** To use an AeroSwitch with another access method, select **NuPoint/Joystick** and then **Joystick Auto Scan**, **Joystick Hold Scan**, **Mouse/USB Joystick**, or **NuPoint**. 3. The Access Method Menu will show the access method you selected. 4. Turn on AeroSwitch. 5. From the Access Method Menu, select **Connect AeroSwitch**. The following message will be displayed: “AeroSwitch is ON. Hit the switch to pair it with NuVoice.” 6. Within **10 seconds**, press the AeroSwitch. **Note:** If you do not press the switch within 10 seconds of seeing the message, the switch will not connect to NuVoice. 7. For each additional switch you want to connect, repeat steps 4 through 6. #### Disconnecting an AeroSwitch Select **Disconnect ALL AeroSwitch** to unpair an AeroSwitch from NuVoice on your device. > [!WARNING] > **Important:** If multiple switches are connected, you cannot disconnect only one. Selecting Disconnect ALL Freedom Switch or Disconnect ALL AeroSwitch disconnects all previously connected switches. --- # Mouse or Joystick Setup ### Step 1: Connect the mouse or joystick to the device #### USB mouse/joystick Plug the USB mouse or joystick into a USB port on the Accent device. #### Bluetooth mouse/joystick/wheelchair joystick 1. Set the Bluetooth mouse, joystick, or wheelchair joystick so it is discoverable. The wheelchair vendor will need to turn on the Bluetooth option before you will be able to connect a wheelchair joystick to the Accent device. 2. Go to the desktop of the Accent device. For dedicated devices: For dedicated devices: 1. Select **Tools**. 2. Select **Toolbox**. 3. Select **Maint Menu**. 4. Select **Hardware Diagnostics**. 5. Select **Network Setup**. 6. Close the network setup window. 1. Select **Tools**. 2. Select **Hide/Show Windows**. 3. From the desktop, select the **Start** **menu** and then select **Settings** > **Devices** > **Bluetooth & other devices**. 4. Turn on Bluetooth. 5. Select **Add Bluetooth or other device** > **Bluetooth**. 6. Choose the device, follow additional instructions if they appear, and then select **Done**. ### Step 2: Set the Access Method 1. Select **Tools** and then **Toolbox**. 2. Select **Access Method Menu**. 3. Select **Choose Different Access Method**. 4. Select **NuPoint/Joystick.** 5. Select **Mouse/USB Joystick**. ### Step 3: Set the Selection Type From the Access Method Menu, set the Selection Type: **Auto:** Activations occur automatically in accordance with the chosen Acceptance Time (how long the cursor must hover over a key). Acceptance Time is adjusted with the arrows. **Manual:** Selections occur by clicking the mouse.