If the AeroSwitch will only be used by one person, routine cleaning and disinfecting should be sufficient. If multiple people will be using it, take additional measures to clean and disinfect after it has been used by one person before handing it to another person.
Routine Cleaning and Disinfecting
Wipe the AeroSwitch with a soft, lint-free cloth slightly dampened with water, and dry it with another soft, lint-free cloth. Do not spray or splash liquid directly on the switch.
To disinfect the switch, moisten a clean cloth in a solution of 1/4 cup of vinegar and 1 cup of water.
Disinfecting an AeroSwitch Used by Multiple People
Note: This section applies only when more than one person will be using the same AeroSwitch. Each time someone uses the switch, it is vital to effectively disinfect it before another person uses it.
First Step: Put on protective gloves
Next Step: Clean the AeroSwitch
Wipe down the switch with disinfectant wipes (Virucidal, Bactericidal, Pseudomonacidal, Tuberculocidal, Fungicidal)—Metrex CaviWipes™. Follow the disinfectant product manufacturer’s instructions for cleaning.
Take a Q-tip with cleaner applied (for example, Windex® cleaner or another commercial cleaner) and clean inside all cracks and crevices. You may want to use a toothbrush or similar brush.
Blow the switch off with an air hose or wipe it dry.
Important: Make sure all soil is removed from the switch. This is vital before proceeding to disinfecting the equipment.
Next Step: Disinfect the AeroSwitch
Wipe down the switch with a new disinfectant wipe (Virucidal, Bactericidal, Pseudomonacidal, Tuberculocidal, Fungicidal)—Metrex CaviWipes. Follow the disinfectant product manufacturer’s instructions for disinfecting.
Make sure to clean inside all cracks and crevices, and wipe more than once if necessary to keep the switch wet for a minimum of three (3) minutes.
Final Step: Allow the AeroSwitch to dry.