--- title: "Disconnect AeroSwitch and Device" slug: "disconnect-aeroswitch-and-device" updated: 2025-08-18T20:18:38Z published: 2025-10-09T18:08:48Z canonical: "documentation.prc-saltillo.com/disconnect-aeroswitch-and-device" --- > ## Documentation Index > Fetch the complete documentation index at: https://documentation.prc-saltillo.com/llms.txt > Use this file to discover all available pages before exploring further. # Disconnect AeroSwitch and Device If you want to disconnect/unpair the AeroSwitch from one device to connect it to a different device, find the instructions below for the original device/software to disconnect the switch. ## Disconnect Accent with NuVoice in Broadcast Mode 1. In NuVoice, go to the Toolbox and select **Access Method Menu**. 2. Select **Disconnect ALL AeroSwitch**. 3. Select **OK** twice. --- ## Disconnect Accent with Empower in Broadcast Mode 1. In Empower, go to **Menu** > **Toolbox** > **System Settings** > **Devices & Connections**. 2. Select the **Switches** tab. 3. Select the Connect Switch **Disconnect all** button. The following message will appear: “Do you want to disconnect all of the switches?” 4. Select **Okay**. The following message will appear: “Unpairing Switches”. When the message disappears, the switch has been disconnected. 5. Select **Close**. --- ## Disconnect Accent with NuVoice or Empower in Keyboard Mode 1. On the device, open the Bluetooth Settings in Windows. 2. Select the AeroSwitch from the list of devices connected. 3. Select **Remove Device** and select **Yes**. --- ## Disconnect NovaChat Device If you connected the AeroSwitch in broadcast mode, you do not need to disconnect it from the device. If you connected the switch in keyboard mode, disconnect it by going to **Menu** > **Application Settings** > **System** > **Bluetooth Settings** > **Connect to Switch** and then selecting **AeroSwitch**. --- ## Disconnect Via Device If you connected the AeroSwitch in broadcast mode, you do not need to disconnect it from the device. If you connected the switch in keyboard mode, disconnect it by going to **iOS** **Settings** > **General** > **Bluetooth** > **AeroSwitch** and then selecting **Forget This Device**. --- ## Devices Not Listed Open the Bluetooth settings on your device and disconnect/unpair according to your operating system documentation.