--- title: "Colocando o quitando el soporte" slug: "positioning-or-removing-the-stand" updated: 2026-07-28T17:27:53Z published: 2026-07-28T17:27:53Z canonical: "documentation.prc-saltillo.com/positioning-or-removing-the-stand" --- > ## Documentation Index > Fetch the complete documentation index at: https://documentation.prc-saltillo.com/llms.txt > Use this file to discover all available pages before exploring further. # Colocando o quitando el soporte > [!CAUTION] > ⚠ No transporte el dispositivo por el soporte. Cuando transporte el dispositivo, utilice el mango o la correa de transporte. ## Colocando el soporte El soporte ofrece varias opciones de visualización. Cuando lo fija contra la parte posterior del dispositivo, ofrece un ligero ángulo para poder ver la pantalla cuando el dispositivo está colocado sobre una superficie plana. Cuando necesite un ángulo mayor, extienda las patas del soporte hacia afuera de la parte posterior del dispositivo haciendo lo siguiente: 1. Coloque el dispositivo boca abajo sobre una superficie plana. 2. Gire el soporte, alejándolo de la parte posterior del dispositivo. 3. Deje que el soporte se trabe en la posición completamente extendida. #### Soporte cerrado: ![A view of the device with the stand closed](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/positioning-or-removing-the-stand-image-swe6wyg4.png?sv=2026-02-06&spr=https&st=2026-11-20T17%3A00%3A22Z&se=2026-11-20T18%3A00%3A22Z&sr=b&sp=r&sig=%2BslHDsnc94YShBG%2BtwcFW9n0ICQYfHZR0g6pQeqQT%2BA%3D) #### Soporte parcialmente abierto: ![A view of the device with the stand partially open](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/positioning-or-removing-the-stand-image-ln4guy1p.png?sv=2026-02-06&spr=https&st=2026-11-20T17%3A00%3A22Z&se=2026-11-20T18%3A00%3A22Z&sr=b&sp=r&sig=ogqkQuaPXLmsxRmFp18goks5ZV1VmMvMe0wmWezHbWY%3D) #### Soporte completamente abierto: ![A view of the device with the stand open completely](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/positioning-or-removing-the-stand-image-oweka07z.png?sv=2026-02-06&spr=https&st=2026-11-20T17%3A00%3A22Z&se=2026-11-20T18%3A00%3A22Z&sr=b&sp=r&sig=XINBr7Xd0kOdO3u5MslBOZRlDjkBAYk6alR3rSTpBGU%3D) --- ## Quitando el soporte Si no desea utilizar el soporte, puede quitarlo de la parte posterior del dispositivo. Puede volver a colocarlo en cualquier momento. > [!CAUTION] > ⚠ Los soportes, tornillos y arandelas sueltas podrían representar un peligro de asfixia. #### Para quitar el soporte: 1. Primero, coloque el dispositivo boca abajo sobre una superficie plana. 2. Con un destornillador Phillips, retire los dos tornillos que sujetan el soporte a la parte posterior del dispositivo de cada lado. ![A close-up of the two screws that hold the stand to the back of the device](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/positioning-or-removing-the-stand-image-h3efxl60.png?sv=2026-02-06&spr=https&st=2026-11-20T17%3A00%3A22Z&se=2026-11-20T18%3A00%3A22Z&sr=b&sp=r&sig=nf0UaqOlFEPRmJ5KK5klUiJHVwXNeGHcRkZrd5%2FGaPI%3D) 3. Suelte el soporte y colóquelo en un lugar seguro en caso de que necesite usarlo luego. #### Para reemplazar el tope del soporte (en caso de que esté roto, por ejemplo): 1. Retire los dos tornillos de los brazos del soporte. 2. Empuje el extremo del brazo del soporte para apartarlo (o retire el soporte por completo si lo prefiere). 3. Retire el tornillo que sujeta el tope del soporte a la parte posterior del dispositivo. ![A close-up of the screw that holds the stand stop to the back of the device.](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/positioning-or-removing-the-stand-image-btatl7mu.png?sv=2026-02-06&spr=https&st=2026-11-20T17%3A00%3A22Z&se=2026-11-20T18%3A00%3A22Z&sr=b&sp=r&sig=r0oS7cbVUtdCcWxL6OT137Xso64XhVi4QlOVHR5rnAU%3D) 4. Retire el tope antiguo, sustitúyalo por el nuevo, inserte el tornillo y vuelva a colocar el soporte.