--- title: "Quitando y volviendo a colocar el mango" slug: "removing-or-reattaching-the-handle-2" updated: 2026-07-29T12:52:58Z published: 2026-07-29T12:52:58Z canonical: "documentation.prc-saltillo.com/removing-or-reattaching-the-handle-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://documentation.prc-saltillo.com/llms.txt > Use this file to discover all available pages before exploring further. # Quitando y volviendo a colocar el mango ### Quitar y volver a colocar el mango 1. Con un destornillador Phillips, retire los tornillos que sujetan el mango en su lugar. ![A close-up of the screws that hold the handle in place.](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/removing-or-reattaching-the-handle-image-me4j6vk1.png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A49%3A22Z&se=2026-11-20T10%3A49%3A22Z&sr=b&sp=r&sig=cZSWPSQTDt8fGGiNMhwxte2VSCmsUhu3qdyUxpMZGSY%3D) 2. Retire el mango del dispositivo. 3. Si no va a montar un módulo NuPoint, es importante colocar la cubierta del puerto para proteger el conector mini USB. ### Para volver a colocar el mango 1. Retire la cubierta del puerto o el módulo NuPoint. 2. Alinee los orificios del mango con los orificios en la parte posterior del dispositivo. 3. Coloque la manija en su lugar. 4. Inserte los tornillos. --- ## Colocando la cubierta del puerto Si quitó el mango y no va a montar un módulo NuPoint, es importante colocar la cubierta del puerto para proteger el conector mini USB en la parte superior del dispositivo. 1. Alinee los orificios de la cubierta con los orificios de la parte posterior del dispositivo.![A close-up showing how to align the holes in the cover with the holes on the back of the device.](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/removing-or-reattaching-the-handle-image-cb05tlhh.png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A49%3A22Z&se=2026-11-20T10%3A49%3A22Z&sr=b&sp=r&sig=28k%2BFwKUjXMDenOgFt46UyzHA57FlfkUqtw11uraiN8%3D) 2. Inserte y apriete los dos tornillos que previamente sujetaron el mango. #### Para quitar la cubierta del puerto: Retire los dos tornillos que sujetan la cubierta del puerto en su lugar. Utilice los tornillos para montar un módulo NuPoint o para volver a colocar el mango. **Nota:** Guarde la cubierta del puerto donde pueda encontrarla si necesita usarla nuevamente.