Note: Infrared (IR) features are only available on non-dedicated devices.
Important: When using infrared in a medical or other closed environment, check with authorities to make sure infrared will not interfere with other equipment. Do not use it with any product that is not medically approved.
Go to the Toolbox and select IR Setup Menu.
With its built-in infrared (IR), your device can learn infrared signals for any device you own that has a remote control. This includes a TV, CD player, DVD player, toys, etc.
Your vocabulary has a Remotes activity or page which contains the basic functions for a number of remote control devices. These pages already have pre-stored commands and icons or pictures on them. You will use the IR Setup Menu to tell your device which signals it is going to learn so it knows where to store them. The IR area is on the back of your device, at the top.
To teach a remote-control signal to your device: turn your device so that the back is facing you and point your remote control at the IR area.
To send an IR signal from your device: make sure the back of your device is facing in the general direction of the device you want to send the signal to.
Important: Save Entire Device Contents
When you finish storing all the remote-control signals that you want to use, we highly recommend that you perform a memory transfer to save your device's memory to a USB flash drive or the internal hard drive. Should your device ever lose its memory, all your remote-control signals will be lost and you will need to reconfigure everything.
Use Save Entire Device Contents, not "Save One User Area". The IR signals will not be saved unless you select Save Entire Device Contents.