--- title: "Head Tracking" slug: "head-tracking-3" updated: 2026-09-20T19:38:08Z published: 2026-09-20T19:38:08Z canonical: "documentation.prc-saltillo.com/head-tracking-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://documentation.prc-saltillo.com/llms.txt > Use this file to discover all available pages before exploring further. # Head Tracking **Note:** Head tracking is available only if a head tracking module is installed on your device. This access method allows a user to use head movements to make selections on the screen. It is an effective access solution for users who have limited or no use of their hands. Using optical sensors, the system tracks a small reflective dot on the user’s forehead, glasses, or other convenient spot converting the natural movement of the user’s head to accurately control the pointer on the screen. Selections are made by dwelling over a button or activating a switch. Additional movement settings, like vertical and horizontal controls, help customize control of the pointer to optimize the user’s accuracy and ease of use. Observe the user’s performance while using the default head tracking settings and note any difficulties the user is experiencing. This will help you decide if adjustments are needed. ## Mounting the Head Tracker > [!WARNING] > **Important:** The head tracker must be securely attached to the device with all screws to operate properly. If you purchased the head tracker with your Genesis device, it is already mounted on the device. If you purchased it later, follow these instructions to attach the head tracker to the device. You can mount a head tracker onto a device with or without a frame attached. You can also mount the head tracker with or without the handle attached. **Note:** The port cover houses the USB port that the head tracker will connect to. 1. Remove the port cover by removing the two screws with a Phillips head screwdriver. You will use the screws you remove from the handle or port cover to fasten the head tracker to the device. > [!CAUTION] > ⚠ Loose screws can be a choking hazard. 2. Align the connector and screw holes on the head tracker with the head tracking USB connector and screw holes on the top edge of the back of the device. 3. Slide the head tracker into place, making sure the connectors are engaged completely. 4. Tighten the two screws you removed in step 1 to secure the head tracker to the device. 5. The head tracker is ready to set up for use. **Note:** The LED on the front of the head tracker indicates the current tracking status. Red indicates that the head tracker is on but is not tracking. Green indicates the head tracker is tracking. --- ## Positioning the User for Head Tracking It is recommended that the user is positioned parallel to the screen, or as close to parallel as possible. The optimal distance is 18 to 30 inches away. When the user is closer to the system, less head movement is required to move the cursor. When the user is further away, more head movement is required to move the cursor. A package of reflective target dots came with the head tracker. Peel a dot from the sheet and place the dot on the forehead of the user between the eyes (or on the nose, brim of a hat, glasses, etc.) The head tracker calculates how light reflects off the dot to detect the user’s head movement. The on-screen cursor moves in the same direction as the user's head movements. Observe the user’s performance while using the default head tracking settings and note any difficulties the user is experiencing. This will help you decide if positioning adjustments are needed. --- ## Software Setup Instructions For instructions on how to calibrate and set up head tracking in **Empower**, see [Setting Up Head Tracking in Empower](/documentation/docs/setting-up-head-tracking-in-empower). For instructions on how to calibrate and set up head tracking in **NuVoice**, see [Setting Up Head Tracking NuVoice](/documentation/docs/setting-up-head-tracking-in-nuvoice).