--- title: "Keyguard Instructions" slug: "keyguard-instructions-5" updated: 2026-09-15T02:42:41Z published: 2026-09-15T02:42:41Z canonical: "documentation.prc-saltillo.com/keyguard-instructions-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://documentation.prc-saltillo.com/llms.txt > Use this file to discover all available pages before exploring further. # Keyguard Instructions ## Attaching the Keyguard 1. Hold the keyguard over the screen, with the pins toward the top of the screen and the tabs toward the bottom. ![](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/keyguard-for-novachat-devices-image-jatn1xam.png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A07%3A45Z&se=2026-11-19T06%3A07%3A45Z&sr=b&sp=r&sig=xr1HpnAJvAGLE4pxt0T4knCRPsDzA%2BQ9Mtv%2F4qKYu%2FQ%3D) 1. Insert one of the keyguard pins into the holder near the top of the device frame. ![A picture containing indoor, accessory, case Description automatically generated](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/image-1750106342124.png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A07%3A45Z&se=2026-11-19T06%3A07%3A45Z&sr=b&sp=r&sig=QJKmNuYmXs3KvjYkx2Ok4lvi3emBxnxYYK2drzQVrCQ%3D) 2. While holding the pin in place, lift upward with your fingers to flex the middle of the keyguard upward slightly. Then insert the other pin into the holder on the other side of the device frame. ![A picture containing accessory, case Description automatically generated](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/image-1750106365261.png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A07%3A45Z&se=2026-11-19T06%3A07%3A45Z&sr=b&sp=r&sig=um197Sd81mziICBxmi0Ez1bDdYaO3fq9t83b2au7Ff4%3D) 3. Press down on the bottom portion of the keyguard to snap the tabs into place. ![](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/NC107KygrdTabsInPlace.png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A07%3A45Z&se=2026-11-19T06%3A07%3A45Z&sr=b&sp=r&sig=k8laqWzi3kMThkvFty%2BVDUyOX7iUVSBNfYMPZsWny8s%3D) #### To raise the keyguard: If you need temporary access to the screen for programming, changing device settings, cleaning the screen, etc., raise the keyguard. 1. While holding the bottom edge of the device with one hand, use the thumb of your other hand to grasp the bottom edge of the keyguard in the middle. 2. Pull upward to release the bottom tabs. ![A picture containing electronics, computer, case Description automatically generated](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/keyguard-for-novachat-devices-image-36e2uwh7.jpg?sv=2026-02-06&spr=https&st=2026-11-19T05%3A07%3A45Z&se=2026-11-19T06%3A07%3A45Z&sr=b&sp=r&sig=CwjKpRoVEbsTVJ3%2BQRzVUy%2FNLzbB2ybACNzs8NZhL%2Fo%3D) #### To remove the keyguard: 1. While holding the bottom edge of the device with one hand, use the thumb of your other hand to grasp the bottom edge of the keyguard in the middle. 2. Pull upward to release the bottom tabs. 3. Lift upward with your fingers to flex the middle of the keyguard upward slightly. 4. Pull the pins out of the holders at the top of the device frame. --- ## Adjusting Speech Display Bar Settings for the Keyguard You will need to change the size of the Speech Display Bar (SDB) to work with the keyguard. Go to **Menu** > **Application Settings > Style**. Under “Speech Display Bar”, and depending on your device model and keyguard, set the font size, number of lines, and icon display as listed below. Under “Miscellaneous”, set Keyguard Inset (when applicable). For your convenience, the font size and number of locations are etched on the bottom of the keyguard (the side that faces the screen). For example: ![](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/keyguard-for-novachat-devices-image-4bhlnne9.png?sv=2026-02-06&spr=https&st=2026-11-19T05%3A07%3A45Z&se=2026-11-19T06%3A07%3A45Z&sr=b&sp=r&sig=6LDonizhB9hDPFRFif7Bp8KbklZvir4bWcVI26S5Gfw%3D) ### NovaRugged 8 **15-, 20, 25-, 42-, 60-location keyguard:** Font Size = 20 Point; Number of Lines = 1 Line; SDB Icons = Off; Keyguard Inset = On **24- or 60-location* keyguard (SDB Icons On):** Font Size = 20 Point; Number of Lines = 1 Line; SDB Icons = On; Keyguard Inset = On * 60-location keyguards used with SDB icons turned on are different keyguards from those used with SDB icons turned off ### NovaRugged 10 **15-, 25-, 42-, 48-, 60-, 80 (40 with dimple)-, or 108 (54 with dimple)-location keyguard:** Font Size = 22 Point; Number of Lines = 1 Line; SDB Icons = Off; Keyguard Inset = On **32- or 60-location* keyguard (SDB Icons On):** Font Size = 14 Point; Number of Lines = 1 Line; SDB Icons = On; Keyguard Inset = On * 60-location keyguards used with SDB icons turned on are different keyguards from those used with SDB icons turned off --- ## Finding Vocabulary Pages that Match the Keyguard Openings Depending on the vocabulary file you are using, some pages (typically keyboards) may not match the keyguard size. Authors have typically provided pages within the file that will work. #### To determine if a more appropriate page is available: 1. Enter Edit Mode by choosing **Menu** > **Edit Mode**. 2. Select **Menu** > **Pages**. 3. Scroll through the list of pages to see if the author may have provided a more appropriate page. If you are using ChatPower, “KB-Keyguard” pages have been provided. 4. Select the page you want and open it to confirm that the page is appropriate. #### To replace the existing page with a keyguard-specific page: 1. Enter Edit Mode by choosing **Menu** > **Edit Mode**. 2. Press and hold the button that links to the page that needs replacing and choose **Edit Button**. 3. Select **Actions**. 4. Select the current linking action (for example: Navigate, Visit, or Jump to Page)**.** 5. Select **Set**. 6. Select the more appropriate page. 7. Select **OK** and then **Save**.