--- title: "Adjusting the Kickstand" slug: "position-or-remove-the-stand" updated: 2026-09-20T19:38:08Z published: 2026-09-20T19:38:08Z canonical: "documentation.prc-saltillo.com/position-or-remove-the-stand" --- > ## Documentation Index > Fetch the complete documentation index at: https://documentation.prc-saltillo.com/llms.txt > Use this file to discover all available pages before exploring further. # Adjusting the Kickstand The kickstand can be used in the closed position, fully open, or you can position it at any angle in between. You can also remove it completely. > [!CAUTION] > ⚠ Do not carry the device by the kickstand. When carrying the device, use the handle or carry strap. ## Opening the Kickstand The kickstand in the latched position provides a slight angle for viewing the screen when the device is sitting on a flat surface. When the user needs an additional angle, extend the legs of the kickstand away from the back of the device by doing the following: 1. Place the device face-down on a flat surface. 2. Remove the bottom of the kickstand from the latches on the back of the device. 3. Pull the stand away from the back of the device. --- ## Removing the Kickstand If you do not want to use the kickstand, you can remove it from the back of the device. You can reattach it at any time. 1. Place the device face-down on a flat surface. 2. Remove the screws from the holders at the end of each of the legs. 3. Pull the holders free and put them in a safe place in case you need to use them later. > [!CAUTION] > ⚠ Loose holders could be a choking hazard. 4. Pull the legs out of the holes in the back of device. 5. Pull the kickstand free and put it in a safe place in case you need to use it later.