--- title: "Powering On the Device" slug: "powering-on-the-device" updated: 2026-11-19T19:51:14Z published: 2026-11-19T19:51:14Z canonical: "documentation.prc-saltillo.com/powering-on-the-device" --- > ## Documentation Index > Fetch the complete documentation index at: https://documentation.prc-saltillo.com/llms.txt > Use this file to discover all available pages before exploring further. # Powering On the Device 1. Press and hold the power button located on the top edge of the device. ![Drawing of the top of the device with a red arrow highlighting the power button at the right side.](https://cdn.document360.io/7e1d5036-9a43-443d-8ea7-a17280ea302d/Images/Documentation/image-1780950193587.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A34%3A50Z&se=2026-11-20T07%3A34%3A50Z&sr=b&sp=r&sig=Ae%2B%2B0PRGAbjgKoDH1co5vTV4ilCXzXfIlJewyRJCX7k%3D) 2. When you hear a beep, release the button. The green power LED will illuminate. 3. Wait for the software to load. **Tip:** If you’re loading Empower software, follow the first steps in the Empower Manual to [Open Empower and Select a Vocabulary](/documentation/docs/getting-started-with-empower-1). #### Notes: - The LED will remain illuminated while the device is on. - The LED will remain illuminated when the device is in sleep mode. - The LED will turn off when the device goes into hibernation. - The LED will turn off when you power off the device.