--- title: "Software Updates" slug: "software-updates-7-1-1-1" updated: 2026-09-20T20:12:38Z published: 2026-09-20T20:12:38Z canonical: "documentation.prc-saltillo.com/software-updates-7-1-1-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://documentation.prc-saltillo.com/llms.txt > Use this file to discover all available pages before exploring further. # Software Updates ## Update via the Internet 1. Verify that your device is connected to a Wi-Fi network. 1. Select the **Tools** key. 2. Select **Hide/Show Windows** from the left side panel. 3. Select the **Wi-Fi** key from the Windows task bar near the clock, and connect to your Wi-Fi. You may need to enter a password if it is a password- protected network. 4. Once connected, select the **Home** key at the bottom center of the Accent device screen to return to your vocabulary in NuVoice. 2. Go to the Toolbox and select **Maint** **Menu**. 3. Select **Software Update** **Menu**. 4. Select **Internet Update**. 5. A message will ask if you want to continue. Select **Yes**. 6. If an update is available, another message will ask if you want to download and install it. Select **Yes**. 7. Another message will ask if you want to continue and install the update. Select **Yes**. 8. You will see a screen that shows you all the files that will be downloaded. The screen will disappear when the update is finished. 9. Select **OK** to exit from the Maintenance Menu. --- ## Update via a USB Flash Drive 1. Insert your USB flash drive into the computer from which you will download the software update. 2. On your computer, go to [prc-saltillo.com/software-downloads](https://prc-saltillo.com/software-downloads). 3. Scroll through the list of updates under Accent NuVoice and select the applicable file. The file will start downloading. 4. Turn on your device and plug in the battery charger. 5. Copy the downloaded software update to your USB flash drive. 6. Remove the USB flash drive from your computer and insert it into your device. 7. On the device, select **Maint** **Menu** from the Toolbox. 8. Select **Software Update** **Menu**. 9. Select **USB Update**. The update process will begin. 10. When the update process is finished, remove the USB flash drive from your device. 11. Once your device is running the new software, you can unplug the battery charger.