Troubleshooting

Prev Next

Note: PRC-Saltillo Service is not responsible for lost vocabulary on devices returned for service. Before you return a device for servicing, back up your vocabulary on a USB memory device.

Key won’t activate after a touch selection

Your touchscreen may be dirty or greasy from fingerprints. Thoroughly clean and dry the screen.

Auto-repeat won't work when using the setting "Activate Key When = Released"

The key is selected after you have released it and after the Release Time has expired.  If you have set a long Release Time you must wait for it to expire before the key will begin to repeat.

Device is beeping and/or things don’t work correctly

Note: This issue applies to non-dedicated devices only.

You probably have a Windows program open and Output turned on. Go to the Toolbox and select Output Menu. Make sure the Output option is turned off. If you frequently use the internal computer and encounter problems with NuVoice, always check the Output Menu first. When the Output option is turned on, anything you do using NuVoice and vocabularies will be sent to the computer. If you forget you have Output turned on, some things you do in NuVoice may affect the Windows program and cause problems.

Device is not producing any audio—cannot hear messages

To prevent possible hearing damage, do not listen to earphones at high volume levels for long periods.

Option 1: Try using the device volume button to turn up the volume in case it was accidentally turned all the way down.

Option 2: Make sure the device volume button hasn’t been deactivated in the software.

  1. Check the status display area on your device screen to make sure lines are visible in the Volume bar graph. If not, select the Volume Up key in the Toolbox until you see some lines in the bar graph.

  2. Select a message and see if it’s spoken so that you can hear it.

  3. If that doesn't work, open the Feedback Menu and make sure the External Speaker option is turned off.

Option 3: On non-dedicated devices, check that the volume is not muted in Windows.

  1. Open the Windows Start menu.

  2. Select Control Panel.

  3. Select the category that includes the Sound options.

  4. Select the Volume tab. Make sure the Mute box is unchecked.

Access/control options work in some environments, but not others

Note: This issue applies to non-dedicated devices only.

There is a compatibility problem between many infrared (IR) controls and high-efficiency fluorescent lights. If you are using your device in a room that has high-efficiency fluorescent lighting, the infrared, including computer access, remote control commands, etc., may not work. Turn the fluorescent lights off and the IR will work.