Wrap Instructions

Prev Next

The coloured wrap protects your device. It was made to fit tightly and stay on once attached. Follow these instructions to change the wrap on your device.

Remove a Wrap

  1. Pull one of the bottom corners of the wrap off the device.

  2. Pull  the other bottom corner off the device.

  3. Pull the sides of the wrap away from the device.

  4. Pull the top of the wrap straight up and over the power and volume buttons until the wrap is off the device.

Attach a Wrap

  1. Align with holes in the top of the wrap with the device power and volume buttons.

    A picture containing text, case, accessory  Description automatically generated

  2. Place one corner of the wrap onto the device.

  3. Pull the other top corner of the wrap onto the device.

    A picture containing person, accessory, hand, case  Description automatically generated

  4. Pull one of the bottom corners of the wrap over the bottom corner of the device. You will need to stretch the wrap to pull it into place.

  5. Pull the other bottom corner of the wrap over the bottom corner of the device. You will need to stretch the wrap to pull it into place.

    A picture containing text, monitor, electronics, case  Description automatically generated

  6. Push the sides of the wrap tightly into place. The image below shows an example of too much space between the wrap and the device frame.

  7. Make sure the top, bottom, and sides of the wrap fit tightly against the device as shown in the image below.

    A picture containing text, blue, oven  Description automatically generated