Eye Tracking

Prev Next

The eye tracking system converts eye movements to cursor movements on the screen. Buttons can be selected by dwelling, blinking, or activating a switch. Before using eye tracking, please review the safety guidelines.

Eye Tracking Safety Guidelines

Fatigue

  • While the user is getting used to eye tracking, take frequent breaks to rest the user’s eyes and relax his or her concentration.

  • Some people may experience a certain amount of fatigue (due to intentional eye focusing and hard concentration) or even a dryness of the eyes (due to less frequent blinking) when first getting used to eye tracking. If you are experiencing fatigue or dry eyes, start off slowly and limit the length of your eye tracking sessions to your comfort level. Consult a medical professional regarding moisturizing eye drops, which may be helpful to combat dryness.

Seizures

  • Some people may have epileptic seizures triggered by light flashes or patterns. This may occur while presented with successive pictures or video material, even if they have never had a seizure before. Observe the individual using the system. Move the person away from the system immediately and consult a physician if the individual shows the following or similar symptoms: involuntary movements, disorientation, convulsions, loss of awareness, or altered vision.

Infrared Emissions

  • Eye tracking systems use infrared (IR) technology. Certain medical devices are susceptible to disturbance by IR emissions. Do not use the eye tracking system when in the vicinity of such susceptible medical devices. If you have questions about the susceptibility of a medical device, consult the manufacturer of the medical device or your health care provider.

  • If you have questions about the susceptibility of a medical device to the infrared technology that is part of your eye tracking system, consult the manufacturer of the medical device or your health care provider.

If you use a pulse oximeter: Pulse oximeters are sensitive to various ambient light wavelengths—specifically direct sunlight or infrared. Most pulse oximeter manufacturers recommend covering the pulse oximeter sensor with an opaque material to ensure desired results under all light conditions. Alternatively, you may be able to position the sensor below the device. However, covering the sensor is more robust against reflected IR and other ambient light interference.

When the device is charged and mounted on a wheelchair or a table stand, you are ready to position the user, calibrate eye tracking, and configure a selection method.


Positioning the User for Eye Tracking

Positioning the eye tracking system in relation to the user is extremely important. The goal of positioning is to achieve a stable eye image for the Genesis eye tracking system to track. Because of this, you will probably need to try out different positions.

Eye Tracking System Parameters

The optimal distance for most users is 25 to 31 inches. The optimal distance varies by user.

If the user moves in and out of the view area, you do not need to recalibrate the system unless the positioning or conditions have significantly changed.  

Positioning Guidelines

Meeting these positioning guidelines will help the user be successful with the eye tracking system.

  • Both eyes must be positioned towards the screen; however, one eye will work.

  • The user should be approximately 20 to 37 inches from the Genesis device screen.

  • The user’s nose should be aimed at the midpoint or upper two-thirds of the screen.

  • The user’s face should be parallel to the screen. If the user is tilted due to positioning or posture, the Genesis device should be tilted at a similar angle.


Software Setup Instructions

For instructions on how to calibrate and set up eye tracking in Empower, see Setting Up Eye Tracking in Empower.

For instructions on how to calibrate and set up eye tracking in NuVoice, see Setting Up Eye Tracking NuVoice.