The colored wrap protects your device. It was made to fit tightly and stay on once attached. Follow these instructions to change the wrap on your Via® Mini or Via® Pro device.
Note: The images in these instructions show the Active wrap. The processes for removing and attaching the Classic wrap are the same.
Remove a Wrap
Pull one or both of the bottom corners of the old wrap off the device.
Tip: The bottom of the Active wrap includes two slits that make it easier to remove the wrap from the device.
Pull the sides of the wrap away from the device.
Pull the top of the wrap off the device.
Attach a Wrap
Align the holes in the top corner of the wrap with the device power and volume buttons. Push the corner of the wrap onto the device.
Pull the other top corner onto the device.
Pull one of the bottom corners of the wrap over the bottom corner of the device. You will need to stretch the wrap to pull it into place.
Pull the other bottom corner of the wrap over the bottom corner of the device. You will need to stretch the wrap to pull it into place.
Push the sides and bottom of the frame into place as shown below. Make sure the top, bottom, and sides of the wrap fit tightly against the device.
